Skip to content
Cart

Workwear by Sector & Hazard

Workwear and PPE grouped by industry and by hazard. The sector section covers rail, law enforcement, laboratories, roofing and height work, warehousing, welding, chefs, hospitality, healthcare, spa and beauty and office wear; the hazard section covers chemical, cold, flame, wet weather, arc flash, low visibility and cut risks.

Sector & Hazard FAQs

What is RIS-3279-TOM rail hi-vis?

RIS-3279-TOM is the GB rail industry standard for orange high visibility clothing worn on the railway. The rail workwear range covers jackets, bodywarmers, coveralls, bib and braces, trousers, polo shirts and T-shirts made to RIS-3279-TOM, most also certified to EN ISO 20471.

What does EN ISO 11611 welding clothing cover?

EN ISO 11611 covers protective clothing for welding and allied processes. Class 1 is for less hazardous welding with fewer spatters, and Class 2 is for more hazardous work with more spatter and radiant heat. Many welding garments also carry EN ISO 11612 for heat and flame. See welding workwear.

What does Type 6 chemical protection mean?

Type 6 clothing to EN 13034 gives limited protection against light sprays and small splashes of liquid chemicals. Higher levels are spray-tight Type 4 and liquid-tight Type 3 protection to EN 14605. See chemical resistant workwear.

Which standards cover cold weather workwear?

EN 342 covers protective clothing for cold environments below -5°C, and EN 14058 covers cool environments. Thermal work gloves are tested to EN 511 for cold. See cold resistant workwear and winter outerwear.

What do waterproof workwear ratings mean?

Rainwear made to EN 343 is graded in classes for water penetration resistance and for breathability (water vapour resistance); a higher class number means higher performance. See waterproof clothing and waterproof footwear.

Are trade accounts available?

Yes. Businesses can apply for a GS Workwear trade account for wholesale rates on workwear and PPE for a whole team. After the form is sent, the team gets in touch to set the account up.

Is GS Workwear an accredited safety supplier?

Yes. GS Workwear is a BSIF Registered Safety Supplier, is certified to ISO 9001 and ISO 14001 and is a Eurosafe member.